"how-to" maintenance, Inspecting the spark plug, Engine oil change – Subaru Robin EH72 FI User Manual

Page 22

Advertising
background image

9. "HOW-TO" MAINTENANCE

16

ENGLISH

INSPECTING THE SPARK
PLUG

Clean off carbon deposits on the
spark plug electrode using a plug
cleaner or wire brush.

Check electrode gap.
Adjust gap to :
0.7mm to 0.8mm (0.03 inches)

Use a proper spark plug :
BPR5ES (NGK) or BPR4EY (NGK)

ENGINE OIL CHANGE

Initial oil change

After 20 hours of operation

Thereafter

Every 100 hours of operation

1. When changing oil, stop the engine

and loosen the drain plug.

2. Re install the drain plug before

refilling oil.

3. Refer to the recommended oil table.

(See Section 3 Pre-operation Checks)

4. Always use the best grade and clean

oil. Contaminated oil, poor quality oil
and shortage of oil cause damage to
engine or shorten the engine life.

OIL CAPACITY : 1.55 liter

0.7 to 0.8 mm
(0.03 in)

Oil drain plug
(On both sides)

Advertising