Epson 2000 - Manual (Page 64)

2. Remove the screws securing the bracket to the drive bay and
brace.
drive
I brace
3. Slide the bracket and drive(s) away from the front of the
computer and lift them out.
lnstalling a Hard Disk Drive Using the Mounting
Bracket
You can install a hard disk drive below the diskette drive in the
mounting bracket, once you have removed the bracket and
drive from the computer. In order to fit in this space, your hard
disk drive must be 1 inch high by 3½ inches wide. If you have
a larger hard disk drive, you can install it in one of the drive
bays (see page 4-15).
Installing and Removing Drives 4-3