KEPCO KLP Series Developer's Guide, Rev 1 - Manual

KEPCO
®
THE POWER SUPPLIER™
MODEL
DEVELOPER’S GUIDE
ORDER NO. REV. NO.
KEPCO, INC. ! 131-38 SANFORD AVENUE ! FLUSHING, NY. 11355 U.S.A. ! TEL (718) 461-7000 ! FAX (718) 767-1102
email: [email protected] ! World Wide Web: http://www.kepcopower.com
KEPCO INC.
An ISO 9001 Company.
KLP SERIES
POWER SUPPLY
1200 WATT PROGRAMMABLE POWER SUPPLY
KLP SERIES
DEVELOPER’S GUIDE
©2013, KEPCO, INC
P/N 243-1138-Vers8-r1
IMPORTANT NOTES:
1)
This manual is valid for the following Model and associated serial numbers:
MODEL SERIAL NO. REV. NO. MODEL SERIAL NO. REV. NO.
KLP 10-150-1200 REV.1 KLP 10-150-1.2K REV.1
KLP 20-120-1200 TBD KLP 20-120-1.2K REV.1
KLP 36-60-1200 TBD KLP 36-60-1.2K REV.1
KLP 75-33-1200 TBD KLP 75-33-1.2K REV.1
KLP 150-16-1200 TBD KLP 150-16-1.2K REV.1
KLP 300-8-1200 TBD KLP 300-8-1.2K REV.1
KLP 600-4-1200 REV.3 KLP 600-4-1.2K REV.1
2) A Change Page may be included at the end of the manual. All applicable changes and
revision number changes are documented with reference to the equipment serial num-
bers. Before using this Instruction Manual, check your equipment serial number to identify
your model. If in doubt, contact your nearest Kepco Representative, or the Kepco Docu-
mentation Office in New York, (718) 461-7000, requesting the correct revision for your
particular model and serial number.
3) The contents of this manual are protected by copyright. Reproduction of any part can be
made only with the specific written permission of Kepco, Inc.
Data subject to change without notice.