Ericsson Scan And System Portable Radios LPE-200 - Manual (Page 25)

AE/LZB 119 1902 R1A
25
PI_MALLOC_ERROR SOFTWARE 503 Could not allocate memory to store crucial
personality data.
UI_FATAL_DEVICE_ERROR PERSDATA 600 Input/output device error.
UI_FATAL_SWTO_MALLOC_ERROR SOFTWARE 601 Software memory error.
UI_FATAL_SWTO_MAX_ERROR SOFTWARE 602 Software error, power cycle the radio.
UI_FATAL_WINDOW_MAX_ERROR SOFTWARE 603 Too many open windows.
UI_FATAL_WINDOW_MALLOC_ERROR SOFTWARE 604 Software memory error.
UI_FATAL_MESSAGE_INVPARM SOFTWARE 605 Invalid parameter to ui_put_message().
Software error, report how error was
encountered.
UI_FATAL_RI_MSGBUF_FULL SOFTWARE 606 UI Task message buffer full error. Software
error, report how error was encountered.
UI_FATAL_RISYS_MSGBUF_FULL SOFTWARE 607 Radio Interface System (EDACS/CONV) task
message buffer full.
UI_FATAL_CI_MSGBUF_FULL SOFTWARE 608 CI Task message buffer full.
UI_FATAL_DEVICE_NOTSUPPORTED PERSDATA 609 I/O device type (from personality) not
supported.
UI_FATAL_AUXIO_MALLOC_ERROR SOFTWARE 610 Software memory error.
UI_FATAL_NET_DEVICE_ERROR PERSDATA 611 Network I/O device error.
UI_FATAL_NO_TONE_DATA PERSDATA 613 No tone data is available in personality.
UI_FATAL_UIIO_MSGBUF_FULL SOFTWARE 614 UI I/O BBOS message buffer full.
UI_FATAL_PROMOTE_MALLOC_ERROR SOFTWARE 615 No memory available.
UI_FATAL_REMAP_MALLOC_ERROR SOFTWARE 616 No memory available.
TU_FATAL_RXBUF_MALLOC_ERROR SOFTWARE 701 No memory available.
TU_FATAL_TXBUF_MALLOC_ERROR SOFTWARE 702 No memory available.
TU_FATAL_PUT_UIMSG_ERROR SOFTWARE 703 BB message to UI task failed.
TU_FATAL_PUT_RISYSMSG_ERROR SOFTWARE 704 BB message to RISYS task failed.
TU_FATAL_FASTPUT_TXMSG_ERROR SOFTWARE 705 BIOS call for Voter Monitor failed.
AEGIS_RXBUF_MALLOC_ERROR SOFTWARE 802 No memory available.
AEGIS_KEYLOAD_MALLOC_ERROR SOFTWARE 803 No Keyloader table memory available.
AEGIS_KEYLOAD_ERROR SOFTWARE 804 General keyload error has occurred.
AEGIS_DATAMEM_MALLOC_ERROR SOFWARE 805 No memory is allocated for data.
AEGIS_KEYLOAD_NOTABLE SOFTWARE 806 No key table was found in EEPROM.
AEGIS_KEYLOAD_BAD_TABLESIZE SOFTWARE 807 Key table found in EEPROM is wrong size.
AEGIS_KEYLOAD_CORRUPT_TABLE SOFTWARE 808 Key table has been corrupted in EEPROM.
Operational Software Non-Fatal System Errors
Software non-fatal errors will be displayed for a short duration and then the radio will try to resume normal operation. If
the error persist, the radio will continue to display the appropriate message everytime the error ocurrs. Some of the errors
listed below contain additional information to help solve the problem.