Purdy ANDpSi121GAOS-HB-KIT - Manual

Displays
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
7/27/07 Tel: 408.523.8216 • Fax: 408.733.1287 • [email protected] 1
www.purdyelectronics.com
ANDpSi121GAOS-HB-KIT
12.1” XGA Color p-Si TFT
LCD Module
The ANDpS121GAOS-HB-KIT is 1024 x 768 Color TFT display
that utilizes new poly-silicon (p-Si) technology to provide a
brighter, thinner and lighter display with high-resolution. The p-Si
TFT technology allows the row and column LCD drivers to be
fabricated directly on the LCD glass. This eliminates the need for
discrete TAB drivers and also reduces the thickness, weight and
overall size of the display.
The 12.1” XGA resolution expands
applications in such areas as electronics books and personal
digital-picture viewers.
Features
• High Luminance
• Built-in Long Life Lamps (MTTF: 50,000 h)
• Replaceable structure of lamp units
• Analog scaling board attachable to LCD backward
• Recommendable inverter attachable to LCD backward
• XGA (1024 x 768 pixels color display)
• Reverse Scan function
• Applications: electronic books and personal digital-picture
viewers
Mechanical Characteristics
Item Specification Unit
Outline
Dimensions
278.3 (H) x 209.0 (V) x 12.0 max (D) mm
Number of
Pixels
1024 (H) x 768 (V) pixels
Active Area 245.8 (H) x 184.3 (V) mm
Viewing Area 247.8 (H) x 186.3 (V)
Pixel Pitch 0.24 (H) x 0.24 (V) mm
Weight (approx.) 685 gram
Backlight Twin CCFL, Sidelight type –
Absolute Maximum Ratings
Item Symbol Min. Max. Unit
Supply Voltage
V
DD
-0.3 4.0 V
V
FL
0 2.0 kV(rms)
FL Driving Frequency f
FL
(0) (100) kHz
Input Signal Voltage V
IN
-0.3
V
DD
+
0.3
V
Operating Ambient Temp. T
op
0 50 °C
Operating Temp. for Panel 0 60 °C
Storage Temperature T
stg
-20 60 °C
Storage Humidity
(Max. Wet bulb temp = 39°C)
– 10 90 %(RH)
*: 8 color bars pattern
**: Except the efficiency of FL inverter
Electrical Characteristics (Ta = 25°C)
Item Symbol Min. Typ. Max. Unit
Supply Voltage
I
FL
=6.0mA(rms)
V
DD
3.0 3.3 3.6 V
V
FL
TBD (580) TBD V(rms)
FL Start Voltage
(Ta = 0°C)
– 1400 – – V(rms)
Differential Input
Voltage
V
ID
100 _ 600 mV
Common Mode
Input Voltage
V
CM
1.0 –
2.4-
(V
ID
)/2
V
Current
Consumption
I
DD * – (220) TBD mA
I
FL **
3.0 – 6.0 mA(rms)
Pwr Consumption
I
FL
=6.0mA(rms)
P – (7.7) – W
Optical Characteristics (Ta = 25°C)
Item Sym. Min. Typ. Max. Unit
Contrast Ratio CR 100 250 – –
Viewing
Angle
(CR ≥ 10) (Upper+Lower) TBD 100 – °
(Left+Right) TBD 120 – °
Response
Time
(t
ON
) t
on
– – 50 ms
(t
OFF
) t
off
– – 50 ms
Luminance
I
FL
=6.0mA(rms)
L (280) (350) – cd/m
2
Lamp Life Time
(Notes 1,2)
MTBF 50,000 h
Note 1: Conditions: Ta = 25°C, I
FL
=6.0mA(rms), continuous lighting
Note 2: Definitions of failure:
a) LCD luminance becomes half of the minimum value.
b) Lamp doesn’t light normally.
Product specifications contained herein may be changed
without prior notice. It is therefore advisable to contact
Purdy Electronics before proceeding with the design of
equipment incorporating this product.