Purdy AND050VL-LED-KIT - Manual

Displays
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
05/13/03 Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com 1
AND050VL-LED-KIT
640 x 480 Pixels
LCD Color Monitor
The AND050VL-LED-KIT is a compact full color TFT LCD
module, whose driving board is capable of converting
composite video signals to the proper interface of LCD panel
and is suitable for computer peripheral, industrial meter,
image communication and multi media.
This device consists of an amorphous silicon panel with
back-light, incorporating a TFT-array that has 640 x 480
pixels on a 5 inch diagonal screen, with pixel in stripe
configuration, 262,144 display colors and a TTL transmission
interface.
Features
• VGA (640 x 480 pixels) resolution
• Amorphous silicon TFT LCD panel with LED back-
light
• Pixel in stripe configuration
• Light weight and slim
• Displays 262,144 colors
• Optimum Viewing Direction: 6 o’clock
• Image Reversion: Up/Down & Left/Right
• Supports the DENB mode, Sync mode (Hsync+Vsync)
• LVDS transmission interface
Mechanical Characteristics
Parameter Specification Unit
Screen Size 5.0 (diagonal) inch
Display
Format
640 (H) x (R, G, B) x 480(V) dot
Display
Colors
262,144
Active Area 101.76 (H) x 74.88 (V) mm
Pixel Pitch 0.159 (H) x 0.156 (V) mm
Pixel
Configuration
Stripe
Outline
Dimension
120.7 (H) x 92.8 (V) x 12.5 (D) mm
Weight 173.6 ± 10 g
Back-light 24-LED
Diplay Mode /
Surface Normally white /
Anti-glare & SWV film
Product specifications contained herein may be changed without prior notice. It is therefore advisable to contact Purdy
Electronics before proceeding with the design of equipment incorporating this product.
Recommended Driving Condition for LED Back Light GND= 0V Ta=25ºC
Parameter Symbol
Specifications
Unit Remark
Min. Typ. Max.
Supply Voltage of LED Backlight V
LED
– 11.0 11.5 V I
L
=20mA
Supply Current of LED Backlight I
LED
– 20 – mA Note 1
Backlight Power Consumption P
LED
– 1.76 1.84 W Note 2
Note 1: The LED driving condition is defined for each LED module. (3 LED Serial)
Note 2: P
LED
= V
LED1
* I
LED1
+ V
LED2
* I
LED2
.... + V
LED7
* I
LED7
+ V
LED8
* I
LED8
• RoHS Compliant
AND050VL-LED-KIT