Purdy AND1013ST-EO2 - Manual

Displays
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: 408-523-8200 • Fax: 408-733-1287 • [email protected] • www.purdyelectronics.com
08/13/11 1
AND1013ST-EO2
Intelligent Character Display
AND1013ST-EO2
Intelligent Character Display
The AND1013ST-EO2 is an STN, Gray, Transfl ective, Positive, Extended
Temperature liquid crystal display. It has a transfl ective rear polarizer, white
EL backlight, 6 o-clock viewing angle and a 6 o’clock viewing direction.
Features
• STN, Gray, Transfl ective, Positive, Extended Temperature
• 160 x 128 Dots
• White EL Backlight
• 6 O’clock Viewing Direction
• Wide Temperature Range
• LCD Module 1/64 Duty, 1/9 Bias
• 175 Gram Weight
• ROHS Compliant
Absolute Maximum Ratings
Item Symbol Min. Max. Unit Condition
Power Supply for Logic VDD -0.3 7.0 V
Input Voltage VIN -0.3 VDD + 0.3 V
Operating Temperature TOP -20 70 ºC Excluded B/L
Storage Temperature TST -30 80 ºC Excluded B/L
Storage Humidity HD – 90 %RH Ta < 40 ºC
Product specifi cations contained herein may be changed without prior notice.
It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product.
Mechanical Characteristics
Item Standard Value Unit
Outline Dimensions 129.0 (L) * 104.5 (W) * 14.0 (H) max mm
Viewing Area 101.0 (L) * 82.0 (W) mm
Active 95.96 (L) * 76.76 (W) mm
Dot Size 0.56 (L) * 0.56 (W) mm
Dot Pitch 0.6 (L) * 0.6 (W) mm
Note: For detailed information, please refer to LCM drawing.
Electrical Characteristics (VDD=5.0V ± 10%, VSS = 0V, Ta = 25ºC)
Item Symbol Condition Min. Typ. Max. Unit
Logic Supply Voltage VDD – 4.5 5.0 5.5 V
“H” Input Voltage VIH L Level VDD - 2.2 – VDD V
“L” Input Voltage VIL H Level 0 – 0.8 V
“H” Output Voltage VOH Ta = -20ºC VDD -0.3 – VDD V
“L” Output Voltage VOL Ta = 25ºC 0 – 0.3 V
Supply Current IDD VDD = 5V – 7.5 10.0 mA
LCM Driver Voltage VOP
-20 ºC – – –
V
25 ºC * 12.3 12.7 13.1
70 ºC – – –
* The VOP test point is VDD-VLCD.