Purdy ANDpSi056ET1S-HB - Manual

Displays
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
9/26/07 Tel: 408.523.8216 • Fax: 408.733.1287 • [email protected] 1
www.purdyelectronics.com
ANDpSi056ET1S-HB
5.61” WSVGA Color p-Si TFT
LCD Module
The ANDpSi056ET1S-HB is 1024 x 600 Color TFT display that
utilizes new poly-silicon (p-Si) technology to provide a brighter,
thinner and lighter display with high-resolution. The p-Si TFT
technology allows the row and column LCD drivers to be
fabricated directly on the LCD glass. This eliminates the need for
discrete TAB drivers and also reduces the thickness, weight and
overall size of the display.
The 5.6” WSVGA resolution
expands applications in mini-notebook PC’s.
Features
• High Luminance - 250 nits
• Single CCFL, Sidelight type
• Replaceable structure of lamp units
• WSVGA (1024 x 600 pixels color display)
• LVDS display data interface
• Applications: hand-held mobile devices
Mechanical Characteristics
Item Specification Unit
Outline
Dimensions
141.8(W) x 84.4 (H) x 7.5max(D) mm
Number of
Pixels
1024(W) x 600(H) pixels
Active Area 122.88 (W) x 72(H) mm
Pixel Pitch 0.120(W) x 0.120(H) mm
Weight (approx.) 85 gram
Backlight Single CCFL, Sidelight type –
Absolute Maximum Ratings
Item Symbol Min. Max. Unit
Supply Voltage V
DD -0.3 +4.0 V
Input Signal Voltage V
IN
-0.3
V
DD
+
0.3
V
Operating Ambient Temperature T
OP
0 50 °C
Operating Ambient Humidity H
OP 10 90 %(RH)
Storage Temperature T
STG -20 +60 °C
Storage Humidity H
STG 10 90 %(RH)
Operating Temperature for
Panel
– 0 +60 °C
*1) The module should be always operated within these ranges. The
"Typ." shows the recommendable value.
*2) Recommended transmitter:
Electrical Characteristics (Ta = 25°C)
Item Symbol Min. Typ. Max. Unit
Supply Voltage 1)
I
FL
=4.0mA(rms)
V
DD
3.0 3.3 3.6 V
V
FL – 500 – V(rms)
FL Start Voltage
(Ta = 0°C)
V
SFL
(1000) – (1500) V(rms)
Common Mode
Input Voltage 2)
V
CM
0.5 1.2 1.75 V
Differential Input
High Threshold
V
TH
_ _ 100 mV
Differential Input
Low Threshold
V
TL
-100 _ _ mV
Current
Consumption
*1(I
DD
) – (200) – mA
*2(I
FL
) – 5.0 5.5 mA(rms)
Pwr Consumption
I
FL
=4.0mA(rms)
P – 2.66 – W
Optical Characteristics (Ta = 25°C)
Item Min. Typ. Max. Unit
Contrast Ratio (CR) (100) (300) – –
Response Time (t
ON
+ t
OFF
) – – 50 ms
Luminance (L)
I
FL
=4.0mA(rms)
120 250 – cd/m 2
Product specifications contained herein may be changed without prior notice.
It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product.
• RoHS Compliant