Purdy Finger Guards - Manual

Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
7/19/07 Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com 1
.
3.25
.180 dia.
(4 places)
3.25 3.52
.195 Ref.
Part No. 5514 (Finger Guard Mini)
Part No. 5504 (Finger Guard Medium)
2.81 ±.02
1.405
.190 ±.02 dia.
(4 holes)
2.81
± .02
3.00
± .02 dia.
.194 Ref.
1.405
45 °Typ
Part No. 5516 (Finger Guard Mini)
1.97
Spacing between rings to be
no greater than .24 max.
.98
WELD
(16 places)
.180 dia.
(4 places)
2.09
.195 Ref.
STAGGER
WELDS
(4)
Part No. 5506 (Finger Guard Large)
.19 dia.
(2 places)
.254 Ref.
6.08 dia.
6.38
Finger Guards
All finger guards are constructed of C1010 wire, spot
welded and nickel chrome plated. Conforms to UL 1/4"
diameter plug gage test.
Part No. 5508 (Finger Guard Small)
Part No. 5520 (Finger Guard Medium)
.16 Ref.
1.26
.63
.160 dia.
(4 places)
1.24
4.12 ±.02
2.06
.190 ±.02 dia.
(4 holes)
.18
.223 Ref. 45 °Typ
4.12
± .02
4.55
± .02 dia.
.56 I.D.
Part No. Fan Compatability
5514 40 mm
5516 60 mm
5508 80 mm
5520 92 mm
5504 120mm
5506 162 mm
Finger Guards
Product specifications contained herein may be changed
without prior notice. It is therefore advisable to contact
Purdy Electronics before proceeding with the design of
equipment incorporating this product.
• RoHS Compliant