Purdy AND190HOP - Manual

Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com 6/12/07
AND190HOP
Ultra Bright LED Lamps: Type 3
Weight: 1.0g Unit: mm
2.0
±
0.2
13.5
±
0.3
11.0
±
0.3
10.0 ±0.2
25.4 MIN.
1.0 MIN.
1. Anode
2. Cathode
1 2
Cathode Index
0.5
2.54
0.5
AND190HOP
InGaAlP High Brightness Orange Light
Emission
T-3 Package (10 mm)
Features
• New emission material (InGaAlP) orange LED
• Peak wavelength (
λ
p = 620 nm) high bright emission
• All plastic mold type, clear colorless lens
• Low drive current, (forward current = 1 to 20 mA)
• Excellent On-Off contrast ratio
• Fast response time, capable of pulse operation
• High power luminous intensity
• Suitable for Outdoor Message Signboards, Automotive use.
• RoHS Compliant
Maximum Ratings (T
a
= 25°C)
Characteristics Symbol Rating Unit
Forward Current I
F 50 mA
Reverse Voltage V
R 5 V
Power Dissipation P
D
125 mW
Operating Temperature Range T
Opr
-40 to 85 °C
Precaution
Please be careful of the following:
1. Soldering temperature: 260°C max
Soldering time: 5 sec. max
Soldering portion of lead: up to 1.6 mm from the body of the device
Storage Temperature Range T
Stg -40 to 100 °C
Electro-Optical Characteristics (T
a
= 25°C)
Characteristics Symbol Test Condition Minimum Typical Maximum Unit
Forward Voltage V
F
I
F
= 20 mA – 2.0 2.4 V
Reverse Current I
R
V
R
= 5 V – – 10 µA
Luminous Intensity I
V
I
F
= 20 mA 4,000 6,000 – mcd
Peak Emission Wavelength λ
P
I
F
= 20 mA – 620 – nm
Spectral Line Half Width ∆ λ I
F
= 20 mA – 18 – nm
Dominant Wavelength λ d I
F
= 20 mA – 615 – nm
Full Viewing Angle θ I
V
= 1/2 Peak – 6 – degree
Maximum Ratings (T
a
= 25°C)
Characteristics Symbol Rating Unit
Product specifications contained herein may be changed without prior notice.
It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product.