Purdy AND180HYP - Manual

O
PTOELECTRONICS
O
PTOELECTRONICS
O
PTOELECTRONICS
Purdy Electronics Corporation • 755 North Pastoria Avenue • Sunnyvale, CA 94085-2918
Tel: 408-523-8200 • Fax: 408-733-1287 • [email protected] • www.purdyelectronics.com
1 9/4/12
AND180HYP
Ultra Bright LED Lamps: Type 3
AND180HYP
AlGaInP High Brightness Yellow Light Emission
T-1 3/4 Package (5mm)
Features
• Peak wavelength (λp = 590 nm) high bright emission
• All plastic mold type, clear colorless lens
• Low drive current: 1 to 20 mA DC
• Excellent On-Off contrast ratio
• Fast response time, capable of pulse operation
• High power luminous intensity
• Suitable for Outdoor Message Signboards
• High reliability, storage temperature -40 to +100ºC
• RoHS compliant
Maximum Ratings (Ta - 25 ºC)
Characteristic Symbol Rating Unit
Forward Current I
F
50 mA
Reverse Voltage V
R
5 V
Power Dissipation P
D
125 mW
Operating Temperature Range T
OPR
-40 to 85 ºC
Storage Temperature Range T
STG
-40 to 100 ºC
Electro-Optical Characteristics (Ta = 25ºC)
Item Symbol Test Condition Minimum Typical Maxiumum Unit
Forward Voltage V
F
I
F
= 20 mA – 2.0 2.8 V
Reverse Current I
R
V
R
= 4 V – – 10 μ A
Luminous Intensity I
V
I
F
= 20 mA 2,500 4,000 8.100 mcd
Peak Emission Wavelength
λ P
I
F
= 20 mA – 590 – nm
Spectral Line Half Width
Δλ
I
F
= 20 mA – 15 – nm
Dominant Wavelength
λ d I
F
= 20 mA – 591 – nm
Full Viewing Angle θ I
V
= 1/2 Peak – 6 – degree
Product specifications contained herein may be changed without prior notice.
I
Weight: 0.31g Unit: mm
Precaution
Please be careful of the following:
1. Dip soldering temperature: 260°C max
Soldering time: 5 sec. max
Soldering portion of lead: up to 1.6 mm from the body of the device
2. The lead can be formed up to 5 mm from the body of the device without forming stress.
Soldering should be performed after the lead forming.