Purdy AND156SYP - Manual

Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com 1 1/11/09
AND156SYP
Ultra Bright LED Lamps
Package Dimensions Unit: mm
AND156SYP
AS AIGa
InP Super Yellow Light Emission
T-1 3/4 Package (5 mm)
Features
• High efficiency
• Absorbing substrate aluminum gallium phosphide
• Viewing Angle: 30 degrees
• All plastic mold type, clear colorless lens
• Low power consumption
• ESD-withstand voltage: up to
2kV
• Pb free
•
Applications: Outdoor Displays, Status Indicators, Backlighting, and
Commercial Use
Maximum Ratings (T
a
= 25°C)
Characteristics Symbol Rating Unit
Continuous Forward Current I
F
50 mA
Peak Forward Current
(Pulse Width < 100 µ s, Duty Cycle <1%)
IFP 100 mA
Operating Temperature T
Opr
-40 ~ + 85 °C
Storage Temperature T
Stg
-40 ~ +100 °C
Soldering Temperature
(Time < 5 seconds)
T
Sol 260 °C
Power Dissipation P
D
1 15 mW
Zener Reverse Current I
Z 100 mA
Electrostatic Discharge ESD 4000 V
Electro-Optical Characteristics (T
a
= 25°C)
Characteristics Symbol Test Condition Minimum Typical Maximum Unit
Forward Voltage V
F
I
F
= 20 mA – 2.0 2.6 V
Zener Reverse Voltage V
Z
I
Z
= 5 mA – – 3.0 V
Luminous Intensity I
V
I
F
= 20 mA 4500 6200 7150 mcd
Peak Emission Wavelength λ
P
I
F
= 20 mA – 591 – nm
Dominant Wavelength λ d I
F
= 20 mA – 589 – nm
Spectrum Radiation
Bandwidth
∆λ I
F
= 20 mA – 15 – nm
Full Viewing Angle 2 θ 1/2 I
F
= 20 mA – 30 – degree
Product specifications contained herein may be changed without prior notice.
It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product.