Purdy AND156EYP - Manual

Ultra Bright LED Lamps: Type 3
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94086
30 Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com 1/5/98
Cathode Index
1.5 max
(1) 8.75
± 0.2
ш5.8
± 0.2
ш5.0 ± 0.2
20
± 1
(2)
0.5
0.5
1. Anode
2. Cathode
0.5
2.54
2 1
1
1.5
1.5
AND156EYP
InGaAlP High Brightness Yellow Light Emission
T-1 3/4 Package (5 mm)
Features
• Peak wavelength (
λ
p = 590 nm) high bright emission
• All plastic mold type, clear colorless lens
• Low drive current: 5 to 20 mA DC
• Excellent On-Off contrast ratio
• Fast response time, capable of pulse operation
• High power luminous intensity
• Suitable for Outdoor Message Signboards
• High reliability
Maximum Ratings (T = 25°C)
Characteristics Symbol Rating Unit
Forward Current I
F
30 mA
Reverse Voltage V
R
4 V
Power Dissipation P
D
75 mW
Operating Temperature Range T
Opr
-30 to 85 °C
Storage Temperature Range T
Stg -40 to 120 °C
Precaution
Please be careful of the following:
1. Soldering temperature: 260°C max
Soldering time: 3 sec. max
Soldering portion of lead: up to 2 mm from the body of the device
2. The lead can be formed up to 5 mm from the body of the device without forming stress.
Soldering should be performed after the lead forming.
Electro-Optical Characteristics (T = 25°C)
Characteristics Symbol Test Condition Minimum Typical Maximum Unit
Forward Voltage V
F
I
F
= 20 mA – 2.1 2.5 V
Reverse Current I
R
V
R
= 4 V – – 50 µA
Luminous Intensity I
V
I
F
= 20 mA 300 800 – mcd
Peak Emission Wavelength l
P
I
F
= 20 mA – 590 – nm
Spectral Line Half Width ∆ λ I
F
= 20 mA – 13 – nm
Dominant Wavelength λ
d I
F
= 20 mA – 587 – nm
Full Viewing Angle θ I
V
= 1/2 Peak – 30 – degree
Weight: 0.31 g Unit: mm