Purdy AND7WA User Manual
And7wa, Features, Applications
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected]
06/20/03
www.purdyelectronics.com
AND7WA
Ultra Bright LED Lamps
Precautions:
1. Static electricity and surge can damage the LED. It is recommended to use wrist band or antistatic gloves when handling the LED.
2. Recommended solder condition:
Electro-Optical Characteristics (T
a
= 25°C)
Characteristics
Symbol
Test Condition
Minimum
Typical
Maximum
Unit
Forward Voltage
V
F
I
F
= 5 mA
–
2.9
3.15
V
Forward Voltage
V
F
I
F
= 20 mA
–
3.4
–
V
Reverse Current
I
R
V
R
= 5 V
–
–
50
µA
Luminous Intensity
I
V
I
F
= 5 mA
28.5
45
–
mcd
Luminous Intensity
I
V
I
F
= 20 mA
–
140
–
mcd
Chromaticity Coordinates
x
I
F
= 20 mA
–
0.29
–
–
Chromaticity Coordinates
y
I
F
= 20 mA
–
0.30
–
–
Full Viewing Angle
2
θ
1/2
I
F
= 20 mA
–
130
–
degree
AND7WA
InGaN Ultra Bright White Light
Low Profile Surface Mount Package
Features
• 0.40 mm height
• Compatible with automatic placement equipment.
•
Compatible w/ infrared & vapor phase reflow solder process.
Applications
• Backlighting in auto dashboard & switch.
• Flat backlight for LCD, switch & symbol.
•
General use for miniature applications.
Maximum Ratings (T
a
= 25°C)
Characteristics
Symbol
Rating
Unit
Forward Current
I
F
25
mA
Reverse Voltage
V
R
5
V
Power Dissipation
P
D
110
mW
Operating Temp. Range
T
Opr
-40~ +85
°C
Storage Temp. Range
T
Stg
-40~ +90
°C
Soldering Temp. (for 5 seconds)
T
Sol
260
°C
Electrostatic Discharge
ESD
150
V
Peak Forward Current (Duty 1/10 @ 1KHz)
I
F
100
mA
Product specifications contained herein may be changed
without prior notice. It is therefore advisable to contact Purdy
Electronics before proceeding with the design of equipment
incorporating this product.
• RoHS Compliant