Purdy AND4WA - Manual

Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] 3-19-03
www.purdyelectronics.com
AND4WA
Ultra Bright LED Lamps
Weight: 2.0 mg Unit: mm
Note: Tolerance unless mentioned
is: ± 0.1 mm; Unit = mm
AND4WA
InGaN Ultra Bright White Light
Emission Surface Mount Package
Features
• P-LCC-2 package
• Fluorescense Type
• High Luminous Intensity
• High Efficiency
Absolute Maximum Ratings (T
a
= 25°C)
Characteristics Symbol Rating Unit
Forward Current I
F 30 mA
Reverse Voltage V
R
5 V
Peak Forward Current (Duty 1/10 @ 1KHz) I
FP
100 mA
Power Dissipation P
D
110 mW
Electrostatic Discharge (HBM) ESD 1000 V
Operating Temperature Range T
Opr
-40 to 85 °C
Storage Temperature Range T
Stg -40to 90 °C
Soldering Temperature T
SOL
Reflow Soldering: 260 ºC for 10 sec. Hand Soldering: 350
ºC for 3 sec.
Electro-Optical Characteristics (T
a
= 25°C)
Characteristics Symbol Test Condition Minimum Typical Maximum Unit
Forward Voltage V
F
I
F
= 20 mA 3.0 – 3.6 V
Reverse Current I
R
V
R
= 5 V – – 50 µA
Luminous Intensity I
V
I
F
= 20 mA 900 – 1800 mcd
Viewing Angle 201/2 I
F
= 20 mA – 120 – degree
Notes:
1. Tolerance of Luminous Intensity: ± 11%
2. Tolerance of Forward Voltage: ± 0.05V
Product specifications contained herein may be changed
without prior notice. It is therefore advisable to contact Purdy
Electronics before proceeding with the design of equipment
incorporating this product.
• RoHS Compliant
• Pb-free