Using your microwave oven – Euro-Pro K5345 User Manual

Page 10

Advertising
background image

Roast
The convection microwave oven has four pre-programmed
settings that make it easy to cook with both convection heat
and microwave so that meats can be made juicy and
tender with just the right amount of browning and
crispness. To use the “Roast” feature:
1.

Press “Roast” button once.

2.

Select the pre-programmed setting that you wish to use
by pressing the number keys “1-4”.

USING YOUR MICROWAVE OVEN

450˚F

400˚F

350˚F

300˚F

Temperature ˚F

Comb4

4

Comb3

3

Comb2

2

Comb1

1

Program

Keypad

3.

Using the number, enter the cooking time.

4.

Press “Start” to begin cooking.

Note: The maximum cooking time that you can program is
99:99 (99 minutes and 99 seconds). The timer will start to
count down when the “Start” button is pressed.
Note: If you want to check the temperature during the
cooking cycle, press the “Roast” button once and the digital
display will show you the selected temperature.
5.

When cooking is complete, the microwave will beep 4
times to let you know that it has finished cooking and
the display will show “END”.

6.

Before starting another cooking session, press the
“Stop/Cancel” button to clear the display and reset the
system.

Note: If you want to temporarily stop the cooking process,
press the “Stop/Cancel” button on the control panel once to
stop it and then press the “Start” button to restart. If you
want to cancel a cooking process, press the “Stop/Cancel”
button twice to cancel.

Popcorn
This feature has been preset to cook a regular bag of
popcorn (100 grams or .22 lb.) automatically without having
to select the power level or the cooking time. To make
popcorn:
1.

Press the “Popcorn” button once. The microwave oven
will default automatically to the default time and the
digital display will show 2:40.

2.

Press the “Start” button.

Note: If the cooking time is not acceptable or you are
making a bigger batch of popcorn, you can change the
cooking time by:
3.

Press the “Popcorn” button twice.

4.

Use the keypad to enter a desired cooking time.

5.

Press “start” to begin.

6.

When cooking is complete, the microwave will beep 4
times to let you know that it has finished cooking and
the display will show “END”.

7.

Before starting another cooking session, press the
“Stop/Cancel” button to clear the display and reset the
system.

Note: The new popcorn time that you programmed will
remain whenever you use the “Popcorn” feature until you
reset it again. To reset the programmed time, you can do it
as described above or unplug the microwave oven and re-
insert the plug back into the electrical outlet. This will reset
to the default factory setting.

Reheat
The “Reheat” feature allows you to reheat any meal.
1.

Press the “Reheat” button once and the digital display
will show the default cooking time of 4:10.

2.

Press the “Start” button.

3.

When reheating is complete, the microwave will beep 4
times to let you know that it has finished cooking and
the display will show “END”.

4.

Before starting another cooking session, press the
“Stop/Cancel” button to clear the display and reset the
system.

Note: If you want to temporarily stop the cooking process,
press the “Stop/Cancel” button on the control panel once to
stop it and then press the “Start” button to restart. If you
want to cancel a cooking process, press the “Stop/Cancel”
button twice to cancel.

Potato
The “Potato” feature is pre-programmed to cook potatoes.
1.

Press the “Potato” button once to select the size of the
potatoes. Press once for small potatoes approximately
4-5 ounces or twice for larger potatoes approximately
6-7 ounces.

2.

Using the keypad, enter the quantity of potatoes that
you are cooking up to four (4) at a time.

11:00

3

Once

5:40

1

Twice

14:00

4

Once

7:10

2

Once

19:00

15:00

10:00

3:50

Cooking Time

4

Twice

3

Twice

2

Twice

1

Once

Quantity

Press
Potato

3.

Press the “Start” button.

4.

When the set time is finished, the microwave will beep
4 times to let you know that it has finished cooking and
the display will show “END”.

5.

Before starting another cooking session, press the
“Stop/Cancel” button to clear the display and reset the
system.

6.

After the cooking program has finished, let the potatoes
stand in the oven for 5-10 minutes.

Note: If you want to temporarily stop the cooking process,
press the “Stop/Cancel” button on the control panel once to
stop it and then press the “Start” button to restart. If you
want to cancel a cooking process, press the “Stop/Cancel”
button twice to cancel.

8

Advertising