Fifth wheel maintenance, Maintenance procedures – SAF-HOLLAND XL-FW10028OM 31 NoLube and 33 Low Lube Series Fifth Wheels User Manual

Page 13

Advertising
background image

13

XL-FW10028OM-en-US Rev A 09-10 Amendments and Errors Reserved. © SAF-HOLLAND, Inc.

NOTE: Removal of the fifth wheel top plate
is not required for maintenance but
may be required when performing
repairs.

IMPORTANT: Do not operate the vehicle
if the plungers are not fully

engaged (locked).

Figure 25

LOCK TRAILER BRAKES AND

PULL FORWARD WITH TRAILER

6.

Retract landing gear legs if lowered.

7.

Verify that slide locking plungers have
been re-engaged by performing a pull
test. Lock trailer brakes and pull for-
ward with tractor to make sure fifth
wheel does not slide (Figure 25).




Failure to properly engage
plungers into slide base

may cause loss of vehicle
control which, if not
avoided, could result in
death or serious injury.

FIFTH WHEEL MAINTENANCE

Failure to properly maintain
your fifth wheel could result

in tractor trailer separation
which, if not avoided, could
result in death or serious
injury.

IMPORTANT: All maintenance must be

performed by a trained

technician using proper tools
and safe procedures.

IMPORTANT: All maintenance must be
performed while the tractor is
uncoupled from the trailer.

Maintenance Procedures

NOTE: Follow instructions published by
landing gear manufacturer for
proper operation of landing gear.

Advertising