Operating instructions, Coupling procedures for over-the road use – SAF-HOLLAND XL-FW428-01 FW2800 Series Hydraulic Elevating Fifth Wheels User Manual
Page 8
Advertising
8
SAF-HOLLAND, Inc. XL-FW428-01 Rev A
OPERATING INSTRUCTIONS
continued
Coupling Procedures for Over-The Road Use
continued
continued
3. Confirm that the lockdown pins
are in the extended position. Both
pins should be fully extended through
the fifth wheel assembly frame rails and
through the lockdown plates.
NOTE: Follow operating instructions for
the landing gear that is installed
on your trailer to raise or lower
landing gear and trailer.
4. Retract landing gear in accordance with
manufacturer’s instructions.
5. Check the brake lines and light cord.
Remove the wheel chocks and continue
with a pre-trip inspection.
USE
LOW
GEAR
SECURE
CRANK
USE
HIGH
GEAR
LOCK PINS EXTENDED
(FOR HIGHWAY USE)
Advertising
This manual is related to the following products: