SAF-HOLLAND XL-FW307-02 3500 LOWLUBE INCLUDES AIR RELEASE - Manual (Page 3)

12. Retract landing gear
until pads come off
the ground.
13. Switch to high gear,
fully retract, and
secure crank handle.
14. Re-check brake lines and light cord. Remove
wheel chocks, continue with pre-trip inspection.
USE
LOW
GEAR!
SECURE
CRANK
1. Position tractor and trailer on firm, level
ground clear of obstacles and persons.
2. Set trailer brakes.
3. Slowly back tractor tightly against trailer.
4. Set tractor brakes.
5. Chock trailer wheels.
6. Lower landing gear
until pads just touch
the ground.
7. Switch to low gear and
crank an additional
4-8 turns.
8. Disconnect brake lines
and light cord.
9. If equipped, pull secondary lock handle and
hook on casting.
10. Pull primary release handle.
If Air Release equipped, actuate the fifth wheel
control valve to open the locks.
11. Release tractor brakes and slowly drive away
from trailer.
SECURE
CRANK
USE
LOW
GEAR!
LUBE TUBE
FITTING
USE
HIGH
GEAR!
XL-FW307-02 3
COUPLING PROCEDURES
continued
UNCOUPLING PROCEDURES:
➎
➋
➍