Whelen RBKT4 - Manual

Page 1
SCREW #6-32 X 1/2 PPHMS SS ,
For reference only
Not included.
11 - 7 6 4 6 7 7 - 0 0 0 FLANGE TALL SURFACE MOUNT , ,
0 1 - 0 2 6 4 4 5 1 - _ _ LIGHTHEAD ASSY GEN II , TIR3™ LED
0 7 - 2 6 4 8 5 4 - 0 2 3 BRACKET, LIGHTHEAD, SINGLE TIR3™
1 4 - 0 8 2 2 1 6 - 0 6 0 SCREW #8-32 X 3/8 PPHMS SS , ,
1 6 - 1 0 11 3 2 0 - 2 0 LOCKWASHER #10 EXT. TOOTH SS ,
11 - 3 6 4 8 5 3 - 0 0 7 BASE LIGHT EAD SINGLE TIR BL K , H , 3™, AC
1 4 - 0 6 2 2 1 6 - 0 8 0
0 1 - 0 4 6 4 8 7 8 - 0 0 LIGHTHEAD, GEN II TIR3™ LED
2
3
REF
1
ITEM PART NUMBER DESCRIPTION QTY
4
5
6
7
2
2
1
REF
1 2
WARNING! Permanent mounting of this product will require
drilling. It is absolutely necessary to make sure that no other
vehicle components could be damaged by this process. Check
both sides of the mounting surface before starting. If damage
is likely, select a different mounting location.
IMPORTANT: It is the responsibility of the
installation technician to make sure that the
installation and operation of this product
will not interfere with or compromise the
operation or efficiency of any
vehicle equipment!
IMPORTANT! Before returning this
vehicle to active service, visually
confirm the proper operation of this
product, as well as all vehicle
components/equipment.
7
6
5
4
3
2
1
RBKT4 Follow the mounting configuration below. The screws that
mount the bracket to the vehicle are customer supplied.
51 Winthrop Road,
Chester, Connecticut 06412-0684
Phone: (860) 526-9504
Fax: (860) 526-4078
©2007 Whelen Engineering Company Inc.
Form No.14091 (012907)
Automotive:
Li
ghtheads
Installation Guide:
Model RBKT4 Swivel Bracket
TIR3™ and LIN3™ Lightheads
®
ENGINEERING COMPANY INC.
Internet: www.whelen.com
Sales e-mail: [email protected]
Canadian Sales e-mail: [email protected]
Customer Service e-mail: [email protected]
For warranty information regarding this product, visit www.whelen.com/warranty
SCREW #6-32 X 1/2 PPHMS SS ,
For reference only
Not included.
11 - 7 6 4 6 7 7 - 0 0 0 FLANGE TALL SURFACE MOUNT , ,
0 1 - 0 2 6 4 4 5 1 - _ _ LIGHTHEAD ASSY GEN II , TIR3™ LED
0 7 - 2 6 4 8 5 4 - 0 2 3 BRACKET, LIGHTHEAD, SINGLE TIR3™
1 4 - 0 8 2 2 1 6 - 0 6 0 SCREW #8-32 X 3/8 PPHMS SS , ,
1 6 - 1 0 11 3 2 0 - 2 0 LOCKWASHER #10 EXT. TOOTH SS ,
11 - 3 6 4 8 5 3 - 0 0 7 BASE LIGHT EAD SINGLE TIR BL K , H , 3™, AC
1 4 - 0 6 2 2 1 6 - 0 8 0
0 1 - 0 4 6 4 8 7 8 - 0 0 LIGHTHEAD, GEN II TIR3™ LED
2
3
REF
1
ITEM PART NUMBER DESCRIPTION QTY
4
5
6
7
2
2
1
REF
1 2
WARNING! Permanent mounting of this product will require
drilling. It is absolutely necessary to make sure that no other
vehicle components could be damaged by this process. Check
both sides of the mounting surface before starting. If damage
is likely, select a different mounting location.
IMPORTANT: It is the responsibility of the
installation technician to make sure that the
installation and operation of this product
will not interfere with or compromise the
operation or efficiency of any
vehicle equipment!
IMPORTANT! Before returning this
vehicle to active service, visually
confirm the proper operation of this
product, as well as all vehicle
components/equipment.
7
6
5
4
3
2
1
RBKT4 Follow the mounting configuration below. The screws that
mount the bracket to the vehicle are customer supplied.
51 Winthrop Road,
Chester, Connecticut 06412-0684
Phone: (860) 526-9504
Fax: (860) 526-4078
©2007 Whelen Engineering Company Inc.
Form No.14091 (012907)
Automot
ive:
Li
ghtheads
Installation Guide:
Model RBKT4 Swivel Bracket
TIR3™ and LIN3™ Lightheads
®
ENGINEERING COMPANY INC.
Internet: www.whelen.com
Sales e-mail: [email protected]
Canadian Sales e-mail: [email protected]
Customer Service e-mail: [email protected]
For warranty information regarding this product, visit www.whelen.com/warranty