ESPRIT EL555 User Manual
Page 12
Advertising
EL555 Elliptical
11
STEP 3: CONNECTING ARM ASSEMBLY
Untie the wire holding the Sleeve Spacer (22) in place on the rod-end bearings located on the
ends of the connecting arms (8&9). Align the hole in the rod ends with the hole in the brackets of
the left and right Handle Bar (10&11). The rod end should be on the inside of the Handle Bar
bracket. Secure both sides with a 5/16 x1-1/4 Hex Head Bolt (79), 5/16 x20mm Flat Washer (100)
and 5/16 Nylon Nut (91) and tighten as much as possible.
Advertising