Encore electronic ENUWI-NX2 - Manual (Page 8)

UNPACKING AND SETUP
This section provides unpacking and setup information for the ENUWI-NX2
Wireless 802.11n USB Adapter.
Unpacking
The box should contain the following items:
‹
One ENUWI-NX2 Wireless 802.11n USB Draft 2.0 USB Adapter
‹
One Driver & Utility CD-ROM
If any item is found missing or damaged, please contact your local reseller or the
store of purchase for replacement.
Setup
Before installation, check the following:
‹
Make sure your computer is running at least a 300MHz or above processor with
256MB RAM or above
‹
Make sure the USB port where the ENUWI-NX2 Wireless 802.11n USB
Adapter is to be used is a USB 2.0 port
‹
The operating system on your computer must be any of the following:
Windows® 2000 (Service Pack 4), XP (Service Pack 2), Windows Vista™
‹
A draft 802.11n or 802.11b/g access point.
‹
Make sure the environment has minimal radio signal interference and/or
obstructions.
2