Etymotic Research Etymotic Ety8 - Manual (Page 2)

What’s Included
• ety8 Bluetooth earphones
• USB charging cable
• Made for iPod® Adapter
• 5 ft. cord with 3.5 mm stereo phone plug
• 1 pair gray 3-flange eartips
• 1 pair gray 2-flange eartips (small)
• 1 pair gray 2flange eartips (large)
• 1 pair foam eartips (medium)
• Filter changing tool
• 2 replacement filters
• Carrying case
• Storage box
• User
instructions
Replacement items and accessories are available at
www.etymotic.com .
Identification and Controls USE PICTURES HERE
Identifying right and left earphones
Earphones are clearly marked L for the left ear and R for the right ear.
Note: Some users have found that the earphones are more comfortable with the left earphone in
the right ear and vice versa. If correct channel representation is critical to the user’s enjoyment of
recorded materials, the earphones can be reprogrammed so that left and right channels are
reversed, but the earphone labels will retain the same L and R designators.
Controls
• Play/Pause
• Volume
Up
• Volume
Down
• Previous
Track
• Next
Track
Pairing
Made for iPod® Adapter.
Ety8 and the iPod adapter are paired together at the factory.
To pair the earphones with another Bluetooth device.
Follow the instructions of the other device with the following specific instructions for the ety8
earphones. To allow ety8 earphones to be “found,” they need to be in a “discoverable” mode:
• Make sure the earphones are powered off.
• Then press and hold the ON button for about 10 seconds.
• The LED on the earphones will flash rapidly.
• The earphones will stay in a discoverable mode for five minutes or until the pairing
completes.
• Follow the instructions for the other device. If a passkey is requested, enter “0000”