Whelen 90033 REV MM THRU VV - Manual

Page 1
®
ENGINEERING COMPANY INC.
Route 145, Winthrop Road,
Chester, Connecticut 06412
Phone: (860) 526-9504
Fax: (860) 526-2009
Internet: www.whelen.com
Sales/Service e-mail: [email protected]
Aviation
Service Bulletin
(Form #13219C)
Installation Kit
Sideplate Retrofit
P/N 01-0416564-00
©1997 Whelen Engineering Company Inc.
Form No.13219C (051501)
90033 REV MM THRU VV
SIDE PLATE HARDWARE:REMOVAL & INSTALLATION
STANDOFF
SIDE PLATE #6 SCREW 1. REMOVE EXISTING SCREWS, SIDE PLATES AND
STANDOFF.
2. INSTALL NYLON STANDOFF & SCREWS, USING
EXISTING SIDEPLATES.
DESCRIPTION P/N
Nylon Screw (#6-32, Slotted) 14-062203-060
Nylon Standoff (Hex, F/F, 3/4”) 20-2408062610
3. ASSEMBLE PARTS AS SHOWN.
4. RE-IDENTIFY PART BY CHANGING REVISION
LEVEL TO WW.
USE PERMANENT INK.
ADHESIVE TAPE INSTALLATION
8.5” TAPE
2” TAPE
1. ATTACH 2” LONG PIECE OF TAPE AS
SHOWN, ALIGNED WITH PART CENTER.
DESCRIPTION P/N
Tape (2”) 66-0450686-01
2. ATTACH 8.5” LONG PIECE OF TAPE AS
SHOWN, OVERLAPPING THE 2” PIECE.
DESCRIPTION P/N
Tape (8.5”) 66-0450686-02
NOTE:
CONFIRM LAMP (BULB) NUMBER
IDENTIFIED ON LAMP BASE IS AMGLO 28V,
150W USA.
IF NOT, REPLACE.