Magnetic Products 200 Series, Abrasion Resistant Plate Magnets User Manual
Specifications
Magnetic Products, Inc.
683 Town Center Drive,
Highland, MI 48357
Tel: 248-887-5600
Email: [email protected] • Website:
Item # 200 Series, Abrasion Resistant Plate Magnets (ARPM Series)
List Price QUOTE
Application:
MPI's Abrasion Resistant Plate Magnets (ARPM Series) are designed for use in gravity-fed angled chutes which convey high volume, abrasive product streams, such
as grains or minerals. ARPM-series Plate magnets provide maximum ferrous tramp iron retention in chute applications where tramp iron "wash-off " can occur.
Operation:
The stainless steel removable wear plate is designed to divert the product stream away from the magnet's surface, while allowing tramp metal to be collected behind
the tramp metal collection step. The wear plate is manufactured with 400 series stainless steel pole areas to maximize the holding power of the magnet. The product
stream is deflected away from the magnet's surface again as it approaches the downstream end of the magnetic field. This allows the product to transfer from the plate
magnet's surface to the spouting surface without impacting in the spout's cut-out areas, thereby, minimizing product damage. When necessary, the removable wear
plate can be easily replaced during regular maintenance of the magnet.
Standard Features:
• Removable stainless steel wear plate contour-deflects product stream to retain tramp metal and minimizes product damage.
• Permanent Ceramic magnet - will not de-magnetize.
• 100% stainless steel enclosed design.
• Stainless steel heavy duty hinges and latches with mounting hardware.
• Maximum magnetic separation circuit.
• 1" wide uniform sealing flange to prevent product leakage.
SPECIFICATIONS
Diagram
Abrasion Resistant Plate Magnets (ARPM Series) Diagram
Length "A"
8.5 in
216 mm
Thickness "B"
1.500 in
38 mm
4/20/2014 | Page 1 of 2