Magnetic Products DMU-220-SC User Manual
Specifications
Magnetic Products, Inc.
683 Town Center Drive,
Highland, MI 48357
Tel: 248-887-5600
Email: [email protected] • Website:
Item # DMU-220-SC, Drawer Magnet and Housing Self-Clean (DMU-200-SC Series)
List Price QUOTE
Application:
MPI's Self-Cleaning 200 Series Drawer Magnet and Housing (DMU-200-SC Series) separators utilize a "Type A" magnetic circuit, which is ideally suited to capture
small contaminants, such as wire, metal shavings and metal, from dry powder or granular free-flowing product streams in gravity-fed vertical chutes. This 200 Series,
DMU-SC Drawer Magnet protects processing equipment such as milling, extruding and mixing while ensuring high product quality standards with automatic magnet
cleaning for maximum magnet performance.
Operation:
The product stream flows through a series of 1" diameter magnetic tubes designed to create an extremely effective magnetic circuit. Each row of magnetic tubes is
staggered to prevent bridging or choking of the product stream and maximize magnetic filtration as product flows through the housing. Tramp metal contaminants are
attracted to the magnetic tubes. The pneumatically operated cleaning system safely removes tramp metal from the product stream to a disposal area outside the
product flow area.
Standard Features:
• 100% stainless steel construction
• Rare Earth Neodymium-Iron-Boron magnet material
• 9" overall height between flanges
• UHMW stripper seals for max. magnet strength
• Operating temperatures up to 175 deg. F
• Complete stripping action of magnetic tubes
• Two rows of 1" dia. magnetic tubes on 2" centers
Optional Features:
• Non-standard magnet tube spacing
• Multi-tier configuration
• Non-standard alloy stainless steel construction
• NEMA enclosures for non-hazardous locations
• Manual "quick-clean" design
• Tramp metal collection trays
• Samarium-Cobalt magnet for higher operating temperatures
• Ceramic 8 magnet material for less severe tramp iron
• Non-standard electrical interface
• Non-standard inlet/outlet flange sizing
• Abrasive resistant and non-stick surface treatment
• Inlet and outlet transition adapters sized to customer specs
• Mechanical valve switch to eliminate electrical requirements
SPECIFICATIONS
4/20/2014 | Page 1 of 2