Euro-Pro EP8020 - Manual (Page 4)

Even if you have used a steam generator iron before, please read all instructions and safeguards
in the Use and Care Instruction Book. In addition, please note the following user tips:
USING STEAM
PLEASE NOTE : Steam performance improves after the first 6-8 hours of usage. The steam
power increases and initial condensation at maximum temperature is reduced.
1. Make sure the temperature setting of the iron is within the steam range on the temperature
selector.
2. Turn power on for iron and steam generator. Before starting to use steam, make sure the
Steam Ready Light (2) is “ON”, indicating that steam is available.
NOTE: Trying to use steam before the Steam Ready Light (2) is “ON” can cause water
drops in the steam coming out of the iron.
CLEARING THE INITIAL CONDENSATION:
3. Clear the initial condensation by pressing the Steam Button (A) up to 3 seconds. Repeat if
necessary.
IMPORTANT NOTE:
4. While using the ironing system, if steam has not been released for more than approximately
5 minutes, the hose has cooled and any steam remaining in the hose from the last use
might condense. Clear this condensation by pressing Steam Button (A) before proceeding
to use the iron.
2