Handling more than one call, Call waiting service 44, Activate call waiting service 44 – Ericsson SH888 User Manual
Page 48: Cancel call waiting service 44, The call waiting service, Receiving a second call
Handling More than One Call
Your Ericsson SH 888 allows you to handle more than
one call simultaneously. This means that you can put a
call that is in progress on hold, while you make or
answer a second call, and then switch between the two
calls. See also ‘Conference Calls’ at the end of this
chapter’.
The Call Waiting Service
To Activate the Call Waiting Service
To be able to receive a second call, you must activate
the ‘Call Waiting’ service.
From the ‘Access’ menu, select ‘Call Waiting’.
Scroll to ‘Activate’, using the navigation key.
To activate the call waiting service, press
YES
.
There may be a short delay before the network
responds. In the meantime, the message ‘Please wait’ is
displayed. This is followed by the message ‘Call Waiting
ON’.
To Cancel the Call Waiting Service
From the ‘Access’ menu, select ‘Call Waiting’.
Scroll to ‘Cancel’, using the navigation key.
To cancel ‘Call Waiting’, press
YES
.
With the ‘Get status’ option, you can check whether the
call waiting service is activated or not.
Receiving a Second Call
If the ‘Call Waiting’ function is activated, you will hear a
tone in the earpiece when a second call is received and
the message ‘Call wait’ will appear in the display.
To End Current Call and Accept Wait-
ing Call
Press
NO
to end the current call. The question
‘Answer?’ appears.
To answer the waiting call, press
YES
.
To Put Current Call on Hold and Accept
Waiting Call
l To put the current call on hold and to answer
the waiting call, press
YES
. The message ‘1 on
hold’ appears.
To Reject Waiting Call
l To reject the waiting call and continue the
current call, press 0 followed by
YES
.
The waiting call is cleared. If the caller’s network
supports it, the caller will hear a busy tone.
Note!
If ‘Divert On busy’ is activated, the waiting call is
diverted to the number you have specified.
To Switch Between Two Calls
l To switch between the active call and the call on
hold, press
YES
.
44
Press
to enter the menu system. See inside the cover.