Element Electronics PDZ-081E - Manual (Page 28)

Video Setup Page
2.Dynamic
This item is used to adjust linear dynamic
compression rate to get different signal
compression Effects.
Press the  or  button to highlight this item.
Press the ENT or  to enter the setup of this item.
Then the item will show as the left.
Press the  or  to choose the proper level.
Press the ENT button to confirm your selection.
Press the  direction button to exit this item.
The items included in this sub-menu are shown as
the left.
1.Sharpness
This item is used to adjust the sharpness of the
Screen.
Press the  or  button to highlight this item.
Press the ENT or  to enter the item.
It included High, Medium and Low, Low by default.
Press  or button to choose the proper one.
Press ENT button to confirm your selection.
Press direction button to exit this item.
2. Brightness
This item is used to adjust brightness level of the
Screen.
Press the  or  button to highlight this item.
Press the ENT or to enter the item.
Press the
 or button to adjust to desired level.
The default level is 00.
Press the ENT button to confirm your selection.
System Setup
28