Eiki XGA Diamond Series LC-XD25 - Manual (Page 21)

21
Basic Operation
How to Operate the On-Screen Menu
The projector can be adjusted or set via the On-Screen
Menu. Refer to the following pages regarding each
adjustment and setting procedures.
Press the Point 7 8 buttons to select a Menu icon to
adjust and press the Point ed buttons to select an
item to adjust.
Press the SELECT button to show the item data. To
adjust the data, press the Point
7 8 buttons. Refer to
the following pages for each adjustment.
To close the On-Screen Menu, press the MENU button
again.
Press the MENU button to display the On-Screen
Menu.
✔ Note:
The selected item is not active until the SELECT
button is pressed.
1
2
3
Top Control
SELECT button
POINT buttons
Remote Control
MENU button
Menu bar
Pointer
(red framed )
Menu icon
Item data
Press the Point 7 8
buttons to adjust the
value.
SELECT
button
Pointer (red framed )
Press the Point ed buttons to
move the pointer.
Item
On-Screen Menu
Quit
Exit this menu.
MENU button SELECT button
POINT buttons
(outer ring)