Changing a bulb, Cleaning the outer surfaces, Cleaning the filter (1) and the fat drip tray (2) – DE DIETRICH DHD1192X User Manual

Page 13: Changing the carbon filter (3)

Advertising
background image

13

4

4 / CARING FOR AND CLEANING YOUR APPLIANCE

EN

CHANGING A BULB

Model with halogen bulb (4)
— Remove the lamp glass
— Change the G4-20W-12V halogen bulb

.

— Re-assemble by repeating these steps in re-
verse order.
Model with LED bulb
— Contact after-sales service

4

CLEANING THE OUTER
SURFACES

To clean the outside of your hood, use soapy
water, rinse with fresh water then wipe with a
soft cloth (do not use abrasive creams, scour-
ing sponges or metal scouring pads).

Note

Disconnect the appliance by unplugging it or using the circuit breaker before cleaning it

or performing other forms of maintenance. Regular maintenance of your appliance is a guar-
antee of proper functioning, good performance and durability.
Failure to respect the guidelines for cleaning the appliance and filters may cause fires.
Please ensure that you adhere carefully to the maintenance recommendations.

CLEANING THE FILTER (1) AND
THE FAT DRIP TRAY (2)

The filter traps fatty vapours. It must be cleaned
after approximately 30 hours of use or at least
once a month. Use a soft brush, hot water and
mild detergent. Rinse and dry it thoroughly before

returning it to the hood.

- Lift and hold the the door.
- Unclip the cartridge filter by pressing down-

ward.

- Remove the fat drip tray (2) by lifting it

upwards.

CHANGING THE CARBON
FILTER (3)

The filter traps cooking smells and must be
replaced every 120 hours of use. Order these fil-
ters at your retailer.
- Remove the carbon filter by unclipping it.
- Dismantle the filter cartridge
- Remove the 2 metal attachment brackets (4)
- Remove the carbon filter from the filter cartridge
- Place the new filter in the filter cartridge
- Reposition the 2 attachment brackets
- Refit the filter cartridge

1

2

3

4

Advertising
This manual is related to the following products: