Esoteric D-07 - Manual (Page 5)

ENGLISH
5
Identifying the Parts
A POWER
Use this button to turn the unit on and off.
The indicator ring lights when the unit is ON.
B WORD
Displays the current word sync or master clock status (see page 10).
C MENU
Press to engage the setup mode (see page 8).
D Remote control sensor
Receives signals from the remote control unit. Point the remote
control unit at this sensor when using the remote control.
You can use the P-05 remote control.
E DISPLAY
Displays the current input, sampling frequency, etc.
B A
C D E F G
F INPUT
Switches digital input source. Select the terminal to which a digital
device is connected. The display flashes when no digital signal is
being input.
< The INPUT buttons (</>) on an Esoteric P-05 remote control can
also be used.
G VOLUME
The volume level can be adjusted from –∞ (MUTE), –99.5 to 0dB.
Use these buttons to adjust the volume when connected directly
to a power amplifier.
When a preamplifier is connected, set the volume to 0.0.
When in the set-up mode, these buttons are used to select the
menu item for setting.
< The VOLUME buttons (–/+) on the P-05 remote control can also be
used.
When using the P-05 remote control to operate this unit, set “RC”
(Remote control) to “Enable” (see page 10).