Echo SRM-3800 TYPE1-E - Manual (Page 14)

- 13 -
SHOULDER HARNESS
•
Install the harness over the both shoulders and
adjust shoulder straps so that the quick release
latch rests low on the right hand side.
•
Attach the trimmer/brushcutter to the harness by
means of the quick release latch.
•
Make some practice sweeps as with a scythe and
readjust the harness as necessary for comfort and
to maintain the cutter parallel to the ground.
WARNING DANGER
IN CASE OF EMERGENCY, PULL THE QUICK
RELEASE LATCH TO DISCONNECT THE
TRIMMER FROM THE HARNESS.
SHIELD
When using a metal blade. Use same as Nylon line.
PULL
Quick
release
latch