Optic system, Display functions, Interface (external connector) – Epson R-D1 User Manual
Page 51: Indicators for camera setting
Appendix
47
A
A
A
A
A
A
A
A
A
A
Optic system
Display functions
Interface (external connector)
Indicators for camera setting
JPEG compression ratio:
Locked at 1/4
PRINT image matching:
Supports PRINT Image Matching Ver.2.6
(JPEG only)
Image sensor:
Primary-color CCD (APS size: 23.7 × 15.6 mm)
Available pixels:6.1 M
Lens mount:
EM mount
Viewfinder:
Real image range finder type see-through viewfinder
Viewfinder
magnification:
Real-size
Range finder:
With coupled coincidence-type range finder
(interlocking range: 0.7m to infinity)
Visual field
frame:
28/35/50 mm bright frame switching, parallax auto
correction
Visual field
ratio:
85% (at 3 m)
Shutter:
Electronically controlled vertically traveling focal
plane shutter
Shutter speed: 1/2000 - 1 sec, bulb
Flash:
Synchronous: 1/125 sec or less
Supported only in synchronized shooting
Metering:
TTL screen surface direct actual-aperture
center-weighted averaged metering
Exposure
control:
Aperture priority auto exposure/manual
LCD monitor: Type 2 low-temperature polysilicon color LCD
235K pixels
Needle
indicator:
4-needle indicator (number of remaining
photos/photo quality/remaining battery
power/white balance setting)
SD card access
LED:
Lit/unlit/blinks red
Memory card I/F:
SD card I/F
X contact:
For external flash (synchronizes at shutter speed
downward than 1/125 sec)
Image size setting:
Normal (JPEG: 2240 × 1488 pixels)
High (JPEG: 3008 × 2000 pixels)
RAW (CCD-RAW)
White balance setting:
Auto (TTL metering auto white
balance)/Sunny/Shade/Cloudy/Incan
descent/Fluorescent
Number of remaining photos: E (no card/card error), 0-500 (500 on
display; up to 999 can be taken)
Remaining battery power:
Full - Empty
Exposure compensation
setting:
-2.0 - +2.0 EV (1/3 EV steps)/AE (Auto)
Shutter speed setting:
1/2000 sec - 1 sec, bulb
ISO speed setting:
200/400/800/1600
Viewfinder angle setting:
28/35/50 mm