Rinse aid, Adjusting the dose, Filling with rinse aid – DE DIETRICH VM7451 User Manual

Page 47

Advertising
background image

47

Rinse aid

Rinse aid is automatically added during the last rinse,
ensuring thorough rinsing, and spot and streak free
drying. The dispenser, which is positioned inside the
door, holds about 110 ml of rinse aid, which is
sufficient for 16 - 40 dishwashing programmes,
depending upon the dosage setting.

Filling with rinse aid

1. Open the container by turning the lid (A)

anticlockwise.

2. Add the rinse aid until the container is completely

full. The indicator (B) will be completely dark.

3. Top up the rinse aid when the indicator (B)

becomes clear.

Ensure that the lid is closed after every refill.

Do not put liquid detergent in the rinse aid
compartment. Clean up any rinse aid spilt during filling
with an absorbent cloth to avoid excess foaming
during the next wash.

Adjusting the dose

According to the finish and drying results obtained,
adjust the dose of rinse aid by means of the 6 position
selector (C) (position 1 minimum dosage, position 6
maximum dosage).

Start from position 3.

Gradually increase the dose if there are drops of water
or lime spots on the dishes after washing. Reduce it if
there are sticky whitish streaks on the dishes.

BRI01en

BR01

A

m

ax

6 5 4 3

2

1

B

BR03

BR02

C

m

ax

6 5 4 3

2

1

Advertising
This manual is related to the following products: