Excessive temperature alarm, Cold accumulator, Thawing – DE DIETRICH DFS620JE User Manual

Page 29: Ice-cube production, Door open acoustic alarm

Advertising
background image

29

Excessive temperature alarm

An increase in the temperature in the freezer
compartment (for example due to an electricity
outage) is indicated by:

- flashing temperature;

- freezer compartment flashing (symbol 2);

- red illumination of display;

- sounding of buzzer.

- alarm symbol.

When normal conditions are restored:

- the acoustic signal shuts off;

- the temperature value continues to flash;

- the display illumination remains red.

When you press key "C" to de-activate the alarm,
the highest temperature reached in the compartment
appears on indicator 2 for approximately 5 seconds.
At this point the flashing stops and the display
illumination changes over from red to white.

Cold accumulator

The appliance is equipped with two cold
accumulator. If there is a power outage, they will
extend food conservation for a few hours.

Thawing

Deep-frozen or frozen food, prior to being used, can
be thawed in the refrigerator compartment or at
room temperature, depending on the time available
for this operation.

Small pieces may even be cooked still frozen,
directly from the freezer: in this case, cooking will
take longer.

Ice-cube production

This appliance is equipped with one or more trays
for the production of ice-cubes. Fill these trays with
water, then put them in the freezer compartment.

Do not use metallic instruments to remove the
trays from the freezer.

Door open acoustic alarm

An acoustic alarm will sound when the door is left
open for around 5 minutes.

The door open alarm conditions are indicated by:

- flashing symbol (1);

- red display illumination;

- beeping sound.

Press the button (C) to stop the acoustic alarm.

When normal conditions are restored (door closed):

- the acoustic alarm will stop.

Advertising