Elta 2309 - Manual (Page 15)

15.
CD / MP3 / WMA OPERATION
PROGRAMMING
Up to 20 tracks can be programmed for disc playback in any order.
Be sure to press the “STOP” button before use.
1. Press the “PROGRAM” button on the remote control, the display will show “P01” and flash.
2. Select the desired track by using the “SKIP +” or “SKIP -” button. (You may select the desired album by
pressing the “ALBUM” button.)
3. Press the “PROGRAM” button on the remote control again to confirm the desired track into the program
ming memory.
4. Repeat step 2 and 3 to enter additional tracks into the programming memory.
5. When all the desired tracks have been programmed, press the “PLAY / PAUSE / USB” button to play the
disc in the order you have programmed.
6. Press the “STOP” button twice to terminate the programmed playback.
MODE
Press the “MODE” button before or during playing CD / MP3 / WMA disc, each press switches the mode
function as follows:
1 - REPEAT 1
2 - REPEAT ALBUM (*MP3 / WMA ONLY )
3 - REPEAT ALL
4 - RANDOM
5 - NORMAL PLAYBACK
REPEAT 1
REP REP
ALBUM
REP
ALL
REPEAT
ALBUM
REPEAT
ALL
NORMAL
PLAYBACK
RAND
RANDOM
SPECIFICATIONS
GENERAL
Power supply : AC 230V ~ 50Hz
Frequency range : AM 525 - 1615kHz
FM 87.5 - 108MHz
(Specification subjects to be changed without notice.)