Euphonix System 5 InDepth - Manual (Page 10)

System 5 Digital Audio Mixing System - InDepth 0
Bright Orange LED
Pointer
New Rotary Touch Knobs
System 5 uses unique rotary illuminated touch-sensitive knobs
that instantly reset after a recall. The center of the knob also
includes a switch which can be used for certain knobset select
functions, and to punch in the knob automation, if the touch-
sensitive knob automation option is switched off.
The displays reflect the type of control, for example a gain con-
trol is shown opposite. Below are the different displays for dif-
ferent functions:
Knobsets
At the top of each strip are a set of 8 knobs with associated
switches. These knobs can be selected to control the following
parameters using the switches just below the knobs:
• Input Controls
• Dynamics
• EQ & Filters
• Aux Sends - level, pre/post and routing
• Pan
• Routing to Group/Clean Feeds and Mix Buses
The selected button in this photo shows that the knobset is
controlling EQ. To the left of these keys are processor In/Out
switches.
Other Channel Functions
Here are just some extra functions available to the engineer:
• Copy and Paste one strip to another
• Use a single strip to select function such as EQ, Dynamics,
Aux for all strips
• Clear all controls
• Lock a strip to prevent changes when the Layout changes
• Select a strip to be controlled from the center section
• Expand a strip so that EQ, Dyn, etc. controls are spread across
several strips
Strips
Processor In/Out Keys
Knobset Function
Select Keys
Q Pan Gain Frequency
& Q
Knob Status LEDs
Touch - Blue
Auto-Glide - Yellow
Read - Green
Write - Red Knob Function Color
Input - Red
Expand - Green
Compress - Turquoise
Pan - Dark Blue
Aux - Yellow
EQ & Filters - Violet
Knob with Push
Switch
Switch
Automation
Write
STRIPS