Emerson Radio MS7625BL - Manual (Page 11)

10
7. If you make a mistake while programming tracks, or to cancel the program
completely, press the PROGRAM button so that the PROGRAM LED Indicator
is flashing, and then press STOP button. The program may also be canceled
by opening the CD door, selecting another function, or switching the power’Off’.
REPEAT PLAYBACK
This feature allows you to repeat a single track, or the entire disc automatically.
• To repeat a single track:
Press the REPEAT button once. The “Dot” between the two digits of the track
number flashes. This indicates you selected the ‘Repeat One’ Mode. Now
select the desired track with the Skip Forward
or Reverse buttons,
and press PLAY/PAUSE button to begin playback. The selected track will
be repeated continuously.
• To repeat the entire disc:
Press the REPEAT button twice. The “Dot” between the two digits of the track
number stays ‘On’. This indicates you selected the ‘Repeat All’ Mode. Press the
PLAY/PAUSE
button to begin playback. The entire disc will be repeated
continuously.
Note: The Repeat Playback feature can be activated while the disc is stopped,
or while the disc is playing.
• To cancel the Repeat Mode, press the REPEAT button until the Repeat Indicator
“Dot” goes “off’. You can also cancel Repeat Mode by pressing the STOP
button, or by switching the Power ‘Off’.
PROGRAM REPEAT
You may also repeat the tracks which you have entered in the Program Memory.
First enter the desired tracks in the Program Memory.
See ‘PROGRAMMED PLAYBACK’ Instructions.
Before you press the PLAY/PAUSE
button to start the program, press the
REPEAT button twice, then press PLAY/PAUSE button. Your programmed
tracks will be repeated continuously.