Amprobe ACF3000-AK AC Current Probe - Manual (Page 6)

Introduction
2
2 INTRODUCTION
The Amprobe ACF3000 AK is an AC current probe utilizing Rogowski
principle. The Amprobe ACF3000 AK can be used to measure AC current
up to 3000 A when used with a DMM, oscilloscope, or other recording
instruments. The flexible measuring head allows current measurements on
conductors that are hard to reach or inaccessible using typical clamp-on
current probes.
The Amprobe ACF3000 AK provides a low-voltage, (3 V AC), output
proportional to the current being measured. Three selectable ranges
provide direct readings for 30 A, 300 A, and 3000 A full scale.