Amprobe IR-750 Infrared-Thermometer - Manual (Page 27)

22
Download Data enables you to download data saved in IR-750 Thermometer.
Tick “Download Data” and click “USB Connect”, the saved data will
automatically upload to PC and display on secondary display.
Exit and close the program
1 Print data
2 Save data (*.txt, *.xls, *.xml)
3 Open files (*.txt, *.xls, *.xml)
4 Deleting current data and create a new data.
Repeat: Tick to display every measurement with the interval you set. Un-tick
“Repeat”, the secondary display screen will only show measurement result
that is different from the last measured temperature. The graph display will
show complete measurement result in graphics despite “Repeat” is ticked or
un-ticked.
Sampling Interval allows you to set the sampling intervals of measurement ( 1
to 9999 seconds).
Note: when measurement data reaching to 10000 sets (measurement No.),
a warning message will pop up and stop measurements. Save or clear the
measurement data before continuing next measurements.
1
2
3
4