Amprobe INSP-3 Wiring-Inspection-Tester User Manual
Page 18
12
13
3. Review the operating instructions for possible
mistakes in operating procedure.
Except for the replacement of the battery, repair of
the meter should be performed only by a Factory
Authorized Service Center or by other qualified
instrument service personnel. The front panel and
case can be cleaned with a mild solution of detergent
and water. Apply sparingly with a soft cloth and allow
to dry completely before using. Do not use aromatic
hydrocarbons or chlorinated solvents for cleaning.
Battery Replacement
Power is supplied by 9V Alkaline Battery x1
To replace the battery, remove the screw from the
back of the meter and pull the battery door outward.
Remove the battery from case bottom and replace it
with a fresh 9V Alkaline battery.
To open,
remove screw