Energizer Air Quality Computer - Manual (Page 4)

3
GETTING STARTED
Press “MENU” key to turn unit on. Unit will automatically turn off after
2 minutes if no keys have been pressed.
GREETING MESSAGE
The PerformAIRE
By ALTRONICS
O2 EQUIPPED
VERSION 6.*
"O2 EQUIPPED" will only appear if the unit was purchased with an
oxygen sensor.
DATA BASE #1
ET MODE Selected
Multiple Run Prediction
Wind Prediction Enabled
Second greeting message above will show the following info about the
“Setup” of the unit: Data base, prediction mode, prediction type, and
wind effect.
TAKING AIR SAMPLES
1. Place PerformBJSF in an area that will constantly expose it to the
air you will be racing in (out side of trailer).
2. Do not place your hand or any other object near the air vent or black
probe while
PerformBJSF is in use.
3. Keep PerformBJSF out of direct sunlight.
4. Do not place PerformBJSF near soil or grass as it may pick up
additional humidity.
5. Even though the
PerformBJSF's sensors can stabilize very quickly,
residual heat left in the enclosure when the PerformBJSF is moved
from one environment to another may take more time to dissipate.
Example: When you arrive at the track and take the
PerformBJSF out
of your 70-degree transporting vehicle and put it in the 90 degree outside
air, you must let it sit for fifteen minutes before taking a reading. During
this time the
PerformBJSF enclosure and black probe will stabilize
with the environment and allow it to take extremely accurate readings for
the rest of the day. Allow time appropriately for differences in