Emerson Radio BO60 - Manual (Page 3)

LIMITED WARRANTY
Emerson radio Corp. warrants manufacturing defects in original
material, including original parts and workmanship, under normal
use and conditions, for a period of ninety(90) days from the date
of original purchase in the U.S. With your dated proof of purchase,
We will provide repair service at no charge for labor and parts
(excluding battery)at an authorized Depot Repair Facility, or replace
the productin our discretion.
For repair or replacement, pack your unit in a padded box, enclose
your check or money order payable to Emerson Radio Corp. in the
amount of $5.00(not required by California residents)to cover
shipping and handling costs, and enclose a copy of your proof of
purchase. Send your unit to:
This warranty does not cover damage from negligence, misuse,
abuse, accident, failure to follow operating instructions,
commercial use, rental, repairs by an unauthorized facility, or
products purchased, used, serviced or damaged outside of the
United States.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY
ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
AU898P
7
The serial number of your system is located on a label on the bottom cabinet.
Please take a moment now to locate the serial number and write the number in
the space provided below. You may be asked to provide this number when
calling for product service.
Emerson Radio Corp.,
5101 Statesman Drive,
Irving,TX 75063
We recommend that you charge your corkscrew for at least
16 hours before using it for the first time. Please follow the
instructions for recharging below:
How to operate the corkscrew
Before using the corkscrew, you must remove any foil from the top of
the bottle using the foil cutter provided.
The corkscrew is operated by a one simple switch. The switch has two
functions.
Press the lower part of the switch to remove a cork from a bottle. Press
the upper part of the switch to release a cork from the mechanism after
you have removed it from the bottle. (See Pic 1)
Recharging your corkscrew
Plug one end of the adaptor cord into the base of the recharging unit and
the other end into a main socket. Place the corkscrew into recharging unit,
ensuring that it is firmly in position and is fully engaged with the recharging
connectors. It will take approximately 12 hours to recharge your corkscrew.
When the corkscrew is fully recharged it can be used to open approximately
30 bottles.
WINE OPENER WINE OPENER
SWITCH
CHARGING STAND CHARGING STAND
LED LIGHT LED LIGHT
ADAPTOR ADAPTOR
2
(Pic.1)
up
down
FOIL CUTTER FOIL CUTTER