EFJohnson SMARTZONE 7780 User Manual

Page 15

Advertising
background image

2-1

November 1999

Part No. 001-7780-500

TRANSCEIVER OPERATION

SECTION 2 TRANSCEIVER OPERATION

2.1 FEATURES

2.1.1 GENERAL FEATURES

16 zones with home zone select

16 channels per zone (256 channels total)

Radio-wide scan

Time-out timer

LCD 8-character alphanumeric display with 12
status annunciators

2.1.2 CONVENTIONAL FEATURES

Channel scan with three user programmable scan
lists

Priority channel sampling

Busy channel lockout (transmit disable on busy)

Monitor mode

Call Guard® (CTCSS/DCS) squelch control

Penalty timer

Conversation timer

Repeater talk-around

DTMF/ANI signaling

User selectable power output

Selectable channel display mode

2.1.3 SMARTNET™ II FEATURES

Group, Enhanced Private Conversation™, Private
Conversation II™, and telephone calls

Call Alert™ (paging)

Emergency calls

Messaging

Priority monitor scanning

Failsoft operation

Dynamic regrouping

2.1.4 SMARTZONE® FEATURES

Site trunking

Site search

Site lock/unlock

2.1.5 LIMITED/ENHANCED KEYPAD

FEATURES

Limited (3-key) and Enhanced (15-key) models

of this transceiver are available. Most features avail-

able with the enhanced keypad model are also avail-
able with the limited keypad model. The features not
available with the limited (3-key) model are as
follows:

Since the DTMF keys are not available, it is not
possible to dial telephone numbers or manually
send DTMF tones. However, telephone calls can
still be placed using prestored numbers.

With conventional standard scanning, only one scan
list is available and it is not user programmable.

With SMARTNET/SmartZone operation, direct
entry of unit ID numbers is not available when
making private calls or sending pages. However,
these calls can still be made by recalling the ID from
a prestored list.

2.2 CONTROLS AND DISPLAY

2.2.1 TOP PANEL CONTROLS

On-Off Volume - Turning this knob clockwise turns
power on and sets the volume level. Turning it coun-
terclockwise to the detent turns power off.

Channel Select Switch - Selects up to 16 prepro-
grammed channels. The selected channel is also indi-
cated in the display.

Antenna Jack - Connection point for the antenna.

BATT

RX

TX

OFF/VOL

6

7

8

5

4

3

2

1

12

11

10 9

16

15

14

13

Transmitter

Keyed

Receive Signal

Detected

Low

Battery

On-Off/Vol

ume

Ant

enna Jack

Channel Select Sw

Advertising