Mpman MINI 100 - Manual (Page 7)

USING CD PLAYER KEYS
The following CD/MP3 control keys are used to control the CD/MP3 player
PLAY/PAUSE : Press this key to start playing CD, Pressing this key during play will stop playing a
moment. To restart, press this key once again
STOP : Press this key to stop playing CD
SKIP/SEARCH : Press this key to moment to next track
: Press to quickly advance the playing location
: Press this key a moment to skip to beginning of the track currently played.
: Press to quickly rewind
REPEAT : Press this key to select or cancel repeat play mode
PROGRAM : Store track number to be played into the memory. Maximum capacity is 20.
STANDARD PLAY
1. Set FUNCTION selector to “DISC” position
2. Open the CD tray by pressing OPEN/CLOSE key, place a CD on the tray and close the CD door. Press
PLAY/PAUSE button to start playing
3. Adjust VOLUME CONTROL and PRESET EQ to suit your personal listening preference
4. High speed forward scan play
Press the forward scan button on the remote control, 3 times quickly fomwards scan will play .Press
again for normal
5. High speed reverse scan play
Press the reverse scan button on the remote control, 3 times quickly reverse scan will play
Press again for normal
6. Skip Function
a) Press skip forward button on the remote control to skip the beginning of next track
b) Press skip back button on the remote control to backward to the beginning of the current track
and then press again to move to the previous track
7. To stop playing, press “STOP” button
TO PLAY A DISC WITH PROGRAM PLAY MODE
Your unit has a program memory to store the playing tracks up to 20 steps:
1. Place a disc in the CD tray then close the CD tray
2. Press “PROG” button on the remote control to start the program memory in STOP mode.The “PROG”
indicator will be light up.
3. Input your desired track number by pressing numeric keys and “PROG” one by one continuously.
4. Press “PLAY/PAUSE” key to start the program play.
5. To erase your program, press “STOP” key during playing the program and the “PROGRAM” indicator will
be distinguished. Otherwise, press“PROG” button to cancel the program.
SETING FOR REPEAT PLAYING MODES
You can set the repeat play mode by pressing “REPEAT” button. When you first press “REPEAT”, the
“Repeat” indicator will keep blinking, so the current tracks will be played over and over until cancelled. Press
“REPEAT” key once again, the “Repeat” indicator will keep blinking, so the current tracks will be played over
and over until cancelled. Press “REPEAT” key once again, the “Repeat” indicator will be steady on, all the
track on the disc will be played over and over until cancelled. Press “Repeat” again to repeat play, “REP”
indicator goes off. Unit play normally.
NOTES ON HANDLING COMPACT DISC
z To keep the disc clean, handle the disc by its edge. Do not touch the disc surface.
z Do not stick paper nor write anything on the surface.
z After playing, store the disc in its case.
6