Mpman MINI300BT - Manual (Page 11)

SPECIAL OPERATION FOR CD
Program
The unit can play selected tracks from a disc in the programmed order.
1. Press STOP button to stop playing, then press PROGRAM, it displays PR 0100.
2. Input the number of first track you want to play.
E.g. input 04, the fourth track will be played as the first song.
3. Repeat step 2 for each of the tracks you want to program.
4. When you have finished programming, press ENTER to start playing tracks in
the programmed order.
5. To cancel programmed playing, press the STOP button twice.
CD Ripping
CD Ripping is to store tracks from a disc to a USB device.
1. Press CD RIP. button to enter CD Ripping mode. It shows <CD RIP>.
2. Press the or to select the ripping speed <NORMAL> or <HIGH>.
When you have selected the speed, the unit enters the ready ripping status.
3. Press NUMBER buttons to select the tracks you want to rip, it shows <RIP_ _ Y>.
When you have selected the first track, it will skip to next ripping interface:
< RIP _ _ Y>.
4. To cancel the track you have selected or delete a selected track, enter the track
number again. When it shows <RIP _ _N>, the selected track is cancelled.
5. To select all tracks, press T/F button. To cancel all tracks, press T/F button again.
6. When you have finished tracks selection, press ENTER button to start ripping.
The selected tracks are stored in a new folder of USB device.
7. While the unit is ripping, the screen displays the ripping track numbers at the
second number 5. If you selected the normal ripping speed, the unit will play
the music.
8. When ripping is complete, it displays <CD RIP>, and the tracks stop playing.
9. To stop ripping at any time, press STOP button twice. Press PLAY/PAUSE button
to start playback from the beginning.
Example,
To rip the 5th and 13th tracks into the USB stick, first press STOP button to stop
playback, then press CD RIP button. Press 0, 5, it displays <RIP 05Y>. Press 1, 3,
it displays <RIP 13Y>. Finally press ENTER to start ripping the selected tracks.
10