PLANET FSD-504HP - Manual

- 1 -
- 2 -
- 3 -
- 4 -
- 5 -
- 6 -
- 7 -
- 8 -
1. Package Contents
Check the following contents of your package:
 Fast Ethernet High Power PoE Switch x 1
 User's Manual x 1
 Power Adapter x 1
 Power Cord x 1
 Rubber Feet x 4
If any of these are missing or damaged, please contact
your dealer immediately; if possible, retain the carton
including the original packing material, and use them
again to repack the product in case there is a need to
return it to us for repair.
4. LED Indicators
 System
LED Color Function
PWR Green
Light: Indicates the Switch has
power.
 Per 10/100Mbps Port
LED Color Function
PoE Orange
Light: Indicates the port is
providing 56V DC in-line
power.
LNK/ACT Green
Light: Indicates the link
through that port is
successfully established
at 10/100Mbps.
Blink: Indicates that the Switch
is actively sending or
receiving data over that
port.
2. Product Features
 RJ-45 Interface
 Five 10/100Mbps Fast Ethernet ports
 4 ports support 56V DC power to PoE Powered
Device
 Power over Ethernet
 Complies with IEEE 802.3af / at Power over
Ethernet Mid-Span PSE
 Up to 4 IEEE 802.3af / 2 IEEE 802.3at devices
powered
 Supports PoE Power up to 30 watts for each PoE
port
 60 watts PoE Budget
 Auto detects powered device (PD)
 Circuit protection prevents power interference
between ports
 Remote power feeding up to 100m
 Switching
 Hardware based 10/100Mbps Auto-Negotiation and
Auto MDI/MDI-X
 Flow control for Full Duplex operation and back
pressure for Half Duplex operation
 1536Bytes packet size support
 Integrates address look-up engine, supporting 1K
absolute MAC addresses
 Automatic address learning and address aging
 Hardware
 Desktop palm size
 LED indicators for PoE ready / activity and LINK /
ACT
 One DC 56V power jack
5. Switch Rear Panel
Figure 5-1 shows the rear panel of FSD-504HP.
56V DC
1 3 5 4 2 Uplink
Figure 5-1: FSD-504HP Rear Panel
Power
Notice
1. The device is a power-required device,
meaning it will not work till it is powered.
If your networks should be active all the
time, please consider using UPS (Uninter-
rupted Power Supply) for your device. It
will prevent you from network data loss
or network downtime.
2. In some area, installing a surge suppres-
sion device may also help to protect your
FSD-504HP from being damaged by un-
regulated surge or current to the FSD-
504HP or the power adapter.
3. The FSD-504HP acceptable power supply
range is DC 48V to DC 56V.
3. Switch Front Panel
Figure 3-1 shows the front panel of FSD-504HP.
PoE
PWR 1 2 3 4 5
FSD-504HP
ACT LNK
5-Port 10/100Mbps
802.3at PoE+ Switch
Figure 3-1: FSD-504HP Front Panel
6. Installing the Switch
This part describes how to install your Fast Ethernet
High Power PoE Switch and make connections to
it. Please read the following topics and follow the
procedures as presented.
Note
This Fast Ethernet High Power PoE Switch
does not need software configuration.
Desktop Installation
To install the Fast Ethernet High Power PoE Switch on
desktop, simply follow the following steps:
Step 1: Attach the rubber feet to the recessed areas
on the bottom of the Fast Ethernet High Power
PoE Switch.
Step 2: Place the Fast Ethernet High Power PoE Switch
on desktop near AC power source for its power
adapter.
Step 3: Keep enough ventilation space between the
Fast Ethernet High Power PoE Switch and the
surrounding objects.
Note
When choosing a location, please keep in
mind the environmental restrictions dis-
cussed in Chapter 7 -- Product Specifica-
tions.
Step 4: Connect your Fast Ethernet High Power PoE
Switch to network devices.
A. Connect one end of a standard network cable to
the 10/100Mbps RJ-45 ports on the back of the
Fast Ethernet High Power PoE Switch.
B. Connect the other end of the cable to the network
devices such as printer servers, workstations or
routers.
Step 5: Connect your Fast Ethernet High Power PoE
Switch to PoE PD devices.
A. Connect one end of a standard network cable to
port 2 to port 5 10/100Mbps RJ-45 ports on the
back of the Fast Ethernet High Power PoE Switch.
B. Connect the other end of the cable to the 802.3at /
af powered devices.
Office Building
Office Building Office Area
Warehouse
Control Room
Speed Dome
IEEE 802.3af
PoE IP Camera
PoE Extender
IEEE 802.3af PoE
VoIP Phone
IEEE 802.3af
PoE IP Camera
IEEE 802.3at
PoE Splitter
FSD-504HP
DC PoE
PoE
PoE
PoE
DC Power Line (DC)
100Base-TX UTP
PoE 100Base-TX UTP with PoE