PLANET MGSW-28240F - Manual (Page 261)

Command Guide of MGSW-28240F
Default:
None
Usage Guide:
To configure EEC options of network-clock
Example:
To configure EEC options (eec1) of network-clock
Switch# configure terminal
Switch (config)# network-clock option eec1
4.2.161 network-clock selector
Command:
network-clock selector { { manual clk-source <clk-source : 1-2> } | selected |
nonrevertive | revertive | holdover | freerun }
network-clock network-clock
selector Selection mode of nominated clock sources
freerun Selector is forced in free run
holdover Selector is forced in holdover
manual Selector is manually set to the chosen clock source
<clk-source : 1-2> Clock source number
clk-source clk-source - commands related to a specific clock source
nonrevertive Selector is automatically selecting the best clock source - non revertively
revertive Selector is automatically selecting the best clock source - revertively
selected Selector is manually set to the pt. selected clocfk source (not possible in unlocked mode)
Default:
None
Usage Guide:
To configure Clock Selection Mode of network-clock
Example:
To configure Clock Selection Mode (Forced Free Run) of network-clock
-261-