PLANET VC-2400MR - Manual (Page 12)

12
7. While IP Address be changed or forgotten admin
password –
To reset the IP address to the default IP Address “192.168.0.100” and the user
name / password to factory default mode (default user name and password are
both admin). Press the hardware reset button at the front panel about 5 seconds.
After the device is rebooted, you can login the management Web interface within
the same subnet of 192.168.0.xx and default user name / password. Be noted, all
the previous setup will disappeared after factory reset.
Hardware Reset button
8. Customer Support
You can browse our online FAQ resource at the PLANET Web site first to check
if it could solve you issue. If you need more support information, please contact
PLANET switch support team.
PLANET online FAQ :
http://www.planet.com.tw/en/support/faq.php?type=1
Switch support team mail address :
[email protected]
Copyright © PLANET Technology Corp. 2010.
Content subjects to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp. All other trademarks
belong to their respective owners.